Application:
It is suitable for salt materials with lower concentration than saturated concentration after evaporation, and sauce materials with better heat sensitivity, viscosity, foaming, lower concentration and better fluidity. It is especially suitable for low temperature continuous evaporation and concentration in milk, glucose, starch, xylose, pharmaceutical, chemical, bioengineering, environmental protection engineering, waste liquid recycling and other industries. It has the main features of high heat transfer efficiency and short heating time of materials.
System structure:
Each effect evaporator, each effect separator, condenser, thermal compression pump,vacuum pump, each effect liquid transfer pump, condensate water pump, operation platform, electric control cabinet, automatic control system and valves, pipelines, etc.
Features:
1.The feed liquid is heated at a low temperature in the evaporator, and most of the liquid is heated and evaporated under vacuum. It is low temperature evaporation. The liquid is continuously fed, continuously discharged, and the liquid is liquid film type flow evaporation, which has high heat transfer efficiency and fast evaporation rate. If the thermal compression technology is adopted, the secondary steam can be fully utilized as the heating source. The energy saving effect is remarkable, and good economic benefits are obtained in the production practice.
2.The equipment is suitable for evaporation and concentration of foaming materials. Because the liquid is evaporated in thin film type in the heating tube. It forms vapor-liquid separation. At the bottom of the heating body, most of the liquid is pumped away, and only a small part of the liquid enters the separation chamber and separation. The entire process of the liquid does not form too much impact, which greatly reduces the generation of foam.
3.The material is accelerated downward in each tube along the inner wall of the tube to flow and evaporate. The short remaining time of the liquid in the evaporator ensures that the beneficial elements in the liquid are not damaged and suitable for the evaporation of non-heat sensitive materials, and especially it is suitable for the evaporation of heat sensitive materials and has been successfully applied in industrial production such as dairy, juice, coffee, beverage, health care products, corn deep processing and sewage treatment.
4.For food evaporation and concentration, the equipment can have the sterilization function at the same time. The material is preheated and then enters the sterilizer at 86℃-94℃ for about 24 seconds. That is, it enters an first effect body, the material evaporates rapidly, and the temperature drops instantaneously.
5.It is equipped with CIP cleaning system to be cleaned on the spot. It is convenient to operate without any dead corner.
6.The equipment can be equipped with an automatic system to realize automatic feeding control, automatic heating temperature control, automatic discharge concentration control, automatic cleaning control, and protection against sensitive materials during sudden power failure and fault. And other automatic operation control such as safety and alarm.
